PHILIPS VRZ364AT99
Owner's Manual

VRZ364/VRZ344

4/7/99 8:10 PM

Page 30

30 Recording
Read and follow the steps below to record a television program.

1 2 3 4

Turn on the TV and set it to channel 3 or 4, whichever the CH3/CH4 switch on the back of the VCR is set to.

1 2 4 5

Turn on the TV. Insert a tape.

Insert a tape with its record tab intact (details are on page 5) in the VCR. The power will come on.

CBL/DBS

TV

VCR

VCR/TV

Press the VCR button.

QUICK PROGRAMMING POWER

EJECT c

3 6 8

1 7 4

+ �

2 8 5 0

+ �

3 9 6

START

STOP

DATE

DBS

DAILY STILL/SLOW

WEEKLY

If the VCR light appears on the display panel of the VCR, go to step 5. If the VCR light does not appear, press the VCR/TV button once.

SPEED

CLEAR

�
REW ;;

+
:: FF

5
Press the SPEED button until the desired tape speed appears on-screen. The VCR will only record in SP or SLP. Details about tape speed are on pages 38 and 52.

PLAY :

9
VOL SKIP JOG/SHTL

STOP L MENU

/OK

CH

EXIT/STATUS

6
REC /OTR

........

6
Use the CH(annel) 8/9 buttons or the Number buttons to select the channel to be recorded.

TIMER

7;;INDEX ::7 AUDIO/MUTE

c

........

7
Press the REC(ord)/OTR button to start recording. The \ light will appear on the VCR display panel.

J
REV 2 3 FWD

7

8 9

To pause the recording (for example, during commercials), press the STILL/SLOW button on the remote control. The \ M M light will appear on the display panel. To resume recording, press the STILL/SLOW button again. The \ light will appear on the display panel.

Helpful Hints
� If the REC(ord)/OTR button is pressed while a tape without a record tab is in the VCR, PROTECTED CASSETTE CANNOT RECORD will appear briefly on screen. The VCR will eject the tape. � The VCR records in a preset volume. � If the end of the tape is reached while recording, the VCR will stop recording, rewind the tape, then stop. Details are on page 51.

Press the STOP 9 button to stop recording. The \ light will disappear from the display panel.