Exactly as described, the full user-manual (145 pages). Perfect.
Text excerpt from page 30 (click to view)
4/7/99 8:10 PM
Read and follow the steps below to record a television program.
1 2 3 4
Turn on the TV and set it to channel 3 or 4, whichever the CH3/CH4 switch on the back of the VCR is set to.
1 2 4 5
Turn on the TV. Insert a tape.
Insert a tape with its record tab intact (details are on page 5) in the VCR. The power will come on.
Press the VCR button.
QUICK PROGRAMMING POWER
3 6 8
1 7 4
2 8 5 0
3 9 6
If the VCR light appears on the display panel of the VCR, go to step 5. If the VCR light does not appear, press the VCR/TV button once.
Press the SPEED button until the desired tape speed appears on-screen. The VCR will only record in SP or SLP. Details about tape speed are on pages 38 and 52.
VOL SKIP JOG/SHTL
STOP L MENU
Use the CH(annel) 8/9 buttons or the Number buttons to select the channel to be recorded.
7;;INDEX ::7 AUDIO/MUTE
Press the REC(ord)/OTR button to start recording. The \ light will appear on the VCR display panel.
REV 2 3 FWD
To pause the recording (for example, during commercials), press the STILL/SLOW button on the remote control. The \ M M light will appear on the display panel. To resume recording, press the STILL/SLOW button again. The \ light will appear on the display panel.
â¢ If the REC(ord)/OTR button is pressed while a tape without a record tab is in the VCR, PROTECTED CASSETTE CANNOT RECORD will appear briefly on screen. The VCR will eject the tape. â¢ The VCR records in a preset volume. â¢ If the end of the tape is reached while recording, the VCR will stop recording, rewind the tape, then stop. Details are on page 51.
Press the STOP 9 button to stop recording. The \ light will disappear from the display panel.