perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Great manual, would not have been able to operate my machine without it!!
James Dawson August 18, 2012
Text excerpt from page 31 (click to view)
Recording 31
Read and follow the steps below to record a television program.
1 2 4
Turn on the TV and set it to channel 3 or 4, whichever channel the CH3/CH4 switch on the back of the VCR is set to. Insert a tape with its record tab intact in the VCR. Press the VCR button.
1 2
Turn on the TV. Insert a tape in the VCR.
4
POWER VCR/TV EJECT
3
3 6 5 7
1 4 7
VCR
TV
CBL/DBS
PLAY REW STOP F.FWD
9
CLEAR
MENU
STATUS/EXIT
If the VCR light appears on the display panel, go to step 5. If the VCR light does not appear, press the VCR/TV button once.
2 5 8 0
3 6 9
ALT. CH
CH
5
Press the SPEED button until the desired tape speed appears briefly on the screen. (Details about tape speed are on page 36.)
VCR PLUS+/ENTER REC/OTR MEMORY
VOL
SLOW MUTE
SPEED
TIME SEARCH PAUSE/STILL
8
6 7 8
Use the CH(annel) o/p button or the Number buttons to select the channel to be recorded.
Press the REC(ord)/OTR button once to start recording. The REC(ord) light will appear.
Helpful Hints
� If you press the REC(ord)/OTR button when there is not a tape in the VCR, NO CASSETTE will flash on the screen. � If you press the REC(ord)/OTR button while a tape without a record tab is in the VCR, the VCR will eject the tape and PROTECTED CASSETTE CANNOT RECORD will flash on the screen. � Other recording options are on pages 32-42. � You can change the tape speed during a recording, but some distortion will appear on the tape. � The VCR will record in a preset volume.
To pause the recording, press the PAUSE/STILL button once. The REC(ord) light will flash. To resume recording, press the REC(ord)/OTR button or press the PAUSE/STILL button again. The REC(ord) light will come on again.
