Last week I bought a second hand BAUKNECHT TRK4850 DRYER. It is a professional machine with many programs and switch options. I feared it would be a huge quest to find a manual. I was delighted when I found owner-manuals.com. After payment I received the file to download the next day already. The quality is great. I am very happy. Thanks!
but kindly the distributions of the operating programs not find in the owners manual,can you help me to understand the operating programs instructions thank you
Received my manual within 24 hours. Very clear scan of the manual I needed. Thanks!
Text excerpt from page 4 (click to view)
Connecting VCR with scart cable
Important for the United Kingdom
This apparatus is fitted with an approved moulded 13 Amp plug. To change a fuse in this type of plug proceed as follows:
1 Remove fuse cover and fuse. 2 Fix new fuse which should be a BS1362 3A, A.S.T.A. or BSI
3 Refit the fuse cover.
If your television does not have a scart (AV-Euro) socket, please do not read further here, but turn to the next paragraph âConnecting VCR without scart cableâ.
If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug contains a fuse, this should have a value of 3A. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5A. Note: * The severed plug must be destroyed to avoid a possible shock hazard should it be inserted into a 13A socket elsewhere. How to connect a plug: The wires in the mains lead are coloured in accordance with the following code: BLUE - âNEUTRALâ (âNâ) BROWN - âLIVEâ (âLâ)
1 The BLUE wire must be connected to the terminal which is
1 Remove the aerial cable plug from your TV set and insert it
socket at the back of the video recorder.
2 Plug one end of the aerial cable provided into the 3
socket on the video recorder and the other end into the aerial input socket on your TV set.
3 Insert the plug of a scart cable into the scart socket
marked with the letter âNâ or coloured BLACK.
2 The BROWN wire must be connected to the terminal
which is marked with the letter âLâ or coloured RED.
3 Do not connect either wires to the earth terminal in the
at the back of your video recorder. Connect the other plug to the TV set.
4 Insert the female plug of the mains cable into the mains
plug which is marked with the letter âEâ or by the safety earth symbol \or coloured green or green-and-yellow. Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead - not simply over the two wires.
at the back of the video recorder.
5 Plug the other end of the mains cable into the wall socket.