There are currently no product reviews.
Exactly as described, the full user-manual (145 pages). Perfect.
Important information for customers in Great Britain
This set is fitted with an approved moulded 13 amp plug.To change the fuse in this plug or to attach a different plug, please proceed as follows:
1 2 3
Take off the fuse cover and remove the old fuse Insert a new fuse. Suitable fuses are those of the type BS 1362 3A,A.S.T.A. or BSI-approved Close the fuse cover
If the attached plug does not meet your requirements, you can cut it off and replace it with a suitable plug. Please observe the following conditions:
If your new plug uses a built-in fuse, this should be a 3A fuse. If your new plug does not contain a built-in fuse, please do not use any fuses in your fusebox with a rating of more than 5A. Please destroy the old, cut-off plug so that it cannot be used elsewhere.
4 5 6
Connect the blue cable (neutral "N") to the terminal in the plug which is marked with the letter "N" or coloured black Connect the brown cable (live, "L") to the terminal in the plug which is marked with the letter "L" or coloured red Do not in any circumstances connect either of the two cables to the terminal in the plug marked with the letter "E", the symbol " \" or coloured green or green/yellow
Before you refit the plug cover, make sure, that the grip at the bottom of the plug is clamped over the plastic cover of the lead, not just over the two wires.
So that you can identify your machine in the event of theft, enter the serial number (PROD. NO) here.You will find it on the type plate on the back of the set.
MODEL NO. PROD. NO.
VR 110/07 ..............................
If you have any problems using the video recorder, please read the corresponding chapters in this instruction manual. If you have any questions, there is also a customer support service available in your country. You can find the telephone number in the guarantee information enclosed in the packaging. Please have your model number (MODEL NO.) and production number (PROD. NO.) ready.
FOR CUSTOMERS IN