perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Great manual, would not have been able to operate my machine without it!!
James Dawson August 18, 2012
Text excerpt from page 5 (click to view)
Before Using Your VCP 5
Putting Batteries in the Remote Control
1 2 3
q q
Remove the battery compartment lid on the bottom of the remote control by sliding the lid in the direction of the arrow.
1 2 3
Insert two AA batteries inside the battery compartment with their + and � ends aligned as indicated.
Replace the battery compartment lid.
Using the Remote Control
Point the remote control at the VCP�s remote sensor when operating the VCP. Do not put objects between the remote control and the VCP.
VCR Maintenance
q q
q
Use only tapes with the mark. Remove any light adhesive stick-on notes from the video cassette tape before putting the tape in the VCP. Removable labels can jam the VCP. Periodic maintenance is required to maintain your VCP�s excellent performance. This VCP has an Automatic Head Cleaner. However, the video heads will require replacement eventually. Only an authorized service center should perform this service.
Types of Video Cassette Tapes
The chart below shows the playback time for three types of video cassettes (T160, T120, and T60). There are three playback speeds: SP, LP, and SLP. Tape Speed SP (standard play) LP (long play) SLP (super long play) Cassette type/Playback Time T160 T120 T60 2 hrs. 2 hrs. 1 hr. 40 mins. 5 hrs. 4 hrs. 2 hrs. 20 mins. 8 hrs. 6 hrs. 3 hrs.
Helpful Hints
� The remote control and its batteries are supplied. � Do not mix alkaline and manganese batteries. � Do not mix old and new batteries.
