Having bought a pre-owned Sony FM stereo tuner through eBay, it came without any manuals. It soon became clear that to get the best from this excellent tuner I needed a decent manual because much of the operation was not intuitive to a newboy to hi fi like me. I managed to download the official Sony multi-lingual manual from Owner-Manuals.com with no problem at all - a really quick and easy service. I'm very glad I did because I found out all the operations of the tuner and was then able to not only set it up quickly but also to get much more from it that poke-and-hope trialling would ever achieve. In my book $4.99 very well spent.
This manual is immaculate in it's accuracy. Everything is written very clearly and easy to understand. Written by a professional who wants to convey a clear and easy to understand message!!
Great site, I always find all the manuals I need and i can't find anywhere else. PDF for the Sony PCM 3348 is complete and scan is good quality. Thank you!
Text excerpt from page 12 (click to view)
XP SBC SC 490 14-02-2003 16:43 Pagina 12
12
ENGLISH
Switching on the units
POWER
1 Make sure the Parent Unit is connected to the TV and the Camera Unit is connected to the Baby Unit.The Parent Unit should be placed in its docking base. 2 Switch on the Baby Unit by pressing POWER (1). > The SYSTEM check light (3) lights green.
SYSTEM
SYSTEM
ON VOLUME OFF ON VOLUME OFF
3 Switch on the Parent Unit by turning the ON VOLUME OFF control (16) to ON. Observe the clicking sound. > The SYSTEM check light (15) lights green. 4 Switch on your TV and select the External Input (·). Note:The Parent Unit must remain in the docking base otherwise the signal from the Baby Unit is interrupted. In this case you will receive no picture on the TV screen.
Adjusting loudspeaker volume of the Parent Unit
� Adjust the volume level of the Parent Unit to the preferred level using the ON VOLUME OFF control (16).
Checking that the units have contact
� Check that the SYSTEM check light (15) on the Parent Unit lights continuously green to confirm that both units have contact. > The SYSTEM check light (15) lights/flashes red and the system check alarm on the Parent Unit beeps when: - the units are not in touch; - out of range; - there is interference.