PHILIPS PR1319C
Owner's Manual

SETTING THE TV�S CLOCK

Y

our television comes with an onscreen clock. During normal operation the clock appears on the screen when the STATUS/EXIT button is pressed or when channel changes occur.
BEGIN

Press the CLOCK button on the remote to display the onscreen CLOCK menu. Press the CURSOR UP v OR CURSOR DOWN w buttons until the words SET CLOCK are highlighted. Enter the current time using the NUMBERED buttons. If the first number is a single digit first enter a zero then the digit (i.e., press �0�, then press �8�). Press the CURSOR RIGHT or CURSOR LEFT buttons to set either AM or PM time. Note: The CLOCK onscreen menu can also be accessed through the main menu by pressing the MENU button; then scrolling up/down with the CURSOR UP v or CURSOR DOWN w buttons until the word CLOCK is highlighted. Press the CURSOR RIGHT button to activate the CLOCK menu and follow the steps above to set the time.
CC CLOCK

SET CLOCK TIMER ACTIVE CHANNEL

- - :- - AM ON 12 SET CLOCK TIMER ACTIVE CHANNEL 10:00 AM ON 12

POWER

1

SLEEP

3
1 4 7
A/CH

2 5 8 0

3 6 9
SURF STATUS

2
Note: If a power failure occurs, the TV's CLOCK will have to be reset. If no time is set, the time will not appear onscreen.

MENU

EXIT

4
VOL
MUTE SMART SMART

CH

Note: The CLOCK onscreen menu can also be accessed through the main menu by pressing the MENU button; then scrolling up/down with the CURSOR UP v or CURSOR DOWN w buttons until the word CLOCK is highlighted. Press the CURSOR RIGHT button to activate the CLOCK menu and follow the steps above to set the time.

SOUND

PICTURE

SMART HELP
Remember: Be sure to press �0� first and then the hour number for single digit entries. To clear the onscreen menu press the STATUS/EXIT button or wait a few seconds after you have finished your adjustment and the menu will automatically disappear from the screen.

18