I used your service and I found myself well I need service manual teac v plate 770 and I was able to access and remove the belt that erno routes. thanks I recommend it to all
At first I thought there had been a mix up as I required the service manual for the cassette unit and the one supplied was for the CD unit. However when I scrolled further down I realised that both had been scanned together! This enabled me to dismantle and repair the cassette unit as intended and I also have a copy of the manual for both the CD and graphic equaliser units should I ever need them. Thanks very much for a great service.
Excelent service, the manual is complete, very cheap and fast
Alberto
Text excerpt from page 89 (click to view)
10-2
Emergency opening of the trays
The trays of the 5DTC are mechanically locked. Release snap as shown in picture 5 and pull tray out.
To open tray 1, 2 and 3 move lever (pos 29) backwards (e.g. with a screwdriver - see picture 2) to its endposition.
To remove a CD from Play Position perform following steps: 1. Open tray 1 as described before. 2. Tear the tray out with speed (see picture 6). The tray can be inserted aftewards without any alignment.
Release the locking mechanism and pull out the tray (see picture 3).
3. Move lever (pos 29) forward to its endposition (see picture 4). 4. Push lever (pos 31) forward (see picture 7).
To open tray 4 and 5 move lever (pos 29) forward to its endposition (see picture 4).