This manual covers the main equipment features only. While it also includes the procedure for saving and loading from the now long obsolete memory cards it does not mention the how to operate with the optional floppy drive interface so I am still at a loss about how to use this! Note that there is a separate manual covering the MIDI interface and programming via the keyboard, not included in this download. You will also need to get hold of this if you want to use the MIDI interface properly. Basically there is little difference between this manual and the free to download manual for the similar PR60 model.
Nothing wrong with the manual or the delivery - came to me the same day I ordered it. But afterwards I realized that I ordered the wrong manual. Probably better with the Quick start - version. So maybe it would be better if we could see a list with inhold for each manual before ordering?
Bought T4850 High End Tuner a few years ago, but i didn't know where all the buttons were used for. So i purchased the owners manual. Perfect! Just what i needed.
Text excerpt from page 34 (click to view)
TROUBLESHOOTING
No Power � Check the TV power cord. Unplug the power cord, wait 10 seconds, then reinsert the plug into the outlet and push the POWER button again. � Check that the outlet is not on a wall switch. � Be sure the fuse is not blown on the AC power strip if one is being used. No Picture � Check the antenna connections. Are they properly secured to the TV's ANT 75� plug? � Check the TUNER MODE control for the correct tuner setting. � Try running the Auto Program feature to find all available channels. No Sound � Check the VOLUME buttons. � Check the MUTE button on the remote control. � If you�re attempting to hook up auxiliary equipment, check the audio connections to the TV from the other device. Remote Does Not Work � Check the batteries. If necessary, replace them with AA Heavy Duty (Zinc Chloride) or Alkaline batteries. � Clean the remote control and the remote control sensor on the front of the TV. � Check the TV power cord. Unplug the power cord, wait 10 seconds, then reinsert the plug into the outlet and push the POWER button again. � Be sure the fuse is not blown on the AC power strip, if one is being used. � Check to be sure the power outlet is not on a wall switch. TV Displays Wrong Channel or No Channels Above 13 � Repeat channel selection. � Add the desired channel numbers (using the CHANNEL EDIT control) into the TV�s memory. � Check to be sure TUNER MODE is set to CABLE if you have Cable TV service. Run the Auto Program feature to find all available channels. Channels 1-125 can be possible only if you have Cable TV service. If you are using an Antenna, only channels 2-69 can be possible.