Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
Text excerpt from page 14 (click to view)
14 Hookups (contâd)
Connecting to a TV and a two-channel Stereo (Stereo has DolbyÂ® ProLogic or right/left Audio In jacks)
Back of TV (example only)
Stereo (example only)
LEFT AUDIO IN
RIGHT AUDIO IN
1 2 3 4 5
Connect the supplied video cable to the yellow VIDEO (VIDEO OUT) jack of the DVD Player and to the TVâs VIDEO IN jack. The supplied video cable has yellow markings. Connect the supplied audio cable to the red and white AUDIO OUT jacks on the DVD Player and to the left/right AUDIO IN jacks on the Stereo. Match the cable colors to the jack colors. Plug the power cords of the DVD Player, Stereo, and TV into an active power outlet. Press STANDBY-ON y on the front of the DVD Player to turn it on. Turn on the Stereo and set it to the correct Audio In channel or sound source. Refer to the Stereo ownerâs manual for details. Turn on the TV. Set it to the correct Video In channel. See your TV ownerâs manual for details. Or, go to your lowest TV channel (01 or 02) and change channels downward until you see the Player's blue DVD screen on the TV.
â¢ If you prefer or need to use the S-VIDEO or Y Pb Pr jacks instead, see pages 12-13.You only need one video connection between the TV and the DVD Player.