There are currently no product reviews.
Return your Warranty Registration card today to
CONTROLS (see figure 1) 1 AL 1 ( ALARM/ OFF) - selects CD alarm; - to cancel or switch off CD alarm. 2 WAKE-UP TRACK - to program to your favorite CD track for wake-up track alarm option. 3 SLEEP - adjusts timer options for CD / radio; - switch on radio for timer mode. 4 REPEAT ALARM/ BRIGHTNESS CONTROL -changes the brightness of the display window; -switches off the alarm for a 9 minute period; -switches off radio / CD timer (SLEEP). 5 Power cord -connect AC-DC adapter plug to wall outlet. 6 Coil antenna -antenna to improve FM reception. 7 CD door - lift here to open / close CD door 8 ALARM RESET (CD/ RADIO OFF) - stops CD / radio playback; - switches off radio / CD timer (SLEEP); - stops the active buzzer, radio or CD alarms for 24 hours. 9 AL 2 ( ALARM/ OFF) - selects radio / buzzer alarm mode;
% TUNING - tunes to a radio station. ^ TIME/ ALARM or 2. & Display - shows the clock / alarm times and status of the unit. POWER SUPPLY
SETTING THE CLOCK AND ALARM TIMES The time is displayed using the 12 hour clock (PM indicator lights up = PM, off = AM). 1. Press and hold down TIME/ ALARM until the clock or alarm time display flashes, then release TIME/ ALARM. â¢ Press TIME/ ALARM repeatedly to toggle between the time or alarm displays 2. Press and hold down â / Â§ to fast adjust both the hours and minutes settings. 3. Release â / Â§ when you have reached the desired setting. y you need to adjust If the time slowly, minute by minute, press and release â / Â§ repeatedly. y After several seconds, the time setting is confirmed when the display stops flashing.
S M A RT. V E RY S M A RT.
ensure you receive all the benefits youâre entitled to.
â¢ Once your Magnavox purchase is registered, â¢ So complete and return the Warranty youâre eligible to receive all the privileges Registration Card enclosed with your of owning a Magnavox product. purchase at once. And take advantage of these important benefits.
- toggle to set the times for the clock time, or alarm 1
Registering your product within 10 days confirms your right to maximum protection under the terms and conditions of your Magnavox warranty.
Your completed Warranty Registration Card serves as verification of ownership in the event of product theft or loss.
Returning your Warranty Registration Card right away guarantees youâll receive all the information and special offers which you qualify for as the owner of your model.
MCR220BK CD CLOCK RADIO
Read this manual ï¬rst!
If you have any problems, do not attempt to return this product to the store.
Return your Warranty Registration Card within 10 days
1. Check if the power voltage, shown on the AC-DC adapter plug, corresponds to your local power supply. If it does not, consult your dealer or service center. 2. Connect the AC-DC adapter plug to the wall outlet. 3. To disconnect the set completely from the power supply, withdraw the AC-DC adapter plug from the wall outlet. The serial and production number are located on the bottom of the set.
Standby power consumption (clock mode)..........2W MEMORY BACKUP The memory backup conveniently allows your clock and alarm time settings to be stored for up to 3 minutes when there is a power interruption e.g. AC power failure. The complete CD clock radio and lighted display will be switched off. As soon as the power supply returns, the display will indicate the correct time. â¢ If power supply returns after 3 minutes you will need to re-enter the clock and alarm time settings. BASIC FEATURES Display brightness 1. Toggle REPEAT ALARM/ BRIGHTNESS CONTROL. y brightness of the display toggles between: The low Âª bright Âª low Volume Press 4 or 3 to adjust the volume level. The volume level uo: is indicated as a number from 0-32.
1. Insert a CD with the printed side facing up, and close the door. 2. Press PLAY/ PAUSE 2; to start playback. y Display shows: 'Cd: --' and the total number of tracks, then your current track number, before returning to clock time. Other possible CD indications before returning to clock time: y door is shown if the CD door is not closed. y noCd is shown if no CD has been inserted /
inserted incorrectly. y nFCd is shown if the CD-R(W) is nonfinalized y Err indicates a general error in operation of the set.
For fast help, call us ï¬rst! 1-800-705-2000
RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
For Customer Use Enter below the Serial No. which is located on the bottom of the cabinet. Retain this information for future reference. Model No. _________________________ Serial No. _________________________
4. Repeat steps 1-3 for each of the clock or alarm
(AL1, AL2) settings. Alarm time display If you have set both alarms, the standby alarm time display will show the earlier of the two alarm times as priority. E.g. if AL1 = 6:00 and AL2 = 5:45, then the standby alarm display will show the AL2 time 5:45.
3. Adjust the sound with 4 or 3. 4. To interrupt, press 2; y icon CD flashes. 5. Press 2; again to resume playback. 6. Press ALARM RESET to stop playback. Note: If CD playback is paused for more than 15 minutes and no controls are pressed, the set automatically goes to standby mode.
Selecting a different track during playback The track number appears briefly in the display when you press â or Â§ to skip tracks. â¢ Press Â§ once or more to skip to the next track(s). â¢ Press â once and playback will return to the beginning of the current track. â¢ Press â more than once to skip to previous tracks.
This âbolt of lightningâ indicates uninsulated material within your unit which may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering.
WARNING: TO PREVENT FIRE
OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. shock, match wide blade of plug to wide slot, and fully insert.
- to cancel or switch off radio / buzzer alarm. 0 VOLUME 3 , 4 - adjusts the sound level. ! PLAY / PAUSE 2; - starts / pauses CD playback. @ DOWN, UP â , Â§ - adjusts clock / alarm times - skips CD tracks / searches for a particular passage. # Tuning indicator - shows the radio frequency of your selected waveband. $ RADIO ON (FM/ AM) - switches on the radio; - selects the radio waveband.
The âexclamation pointâ calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems.
CAUTION: To prevent electric
IMPORTANT SAFETY INSTRUCTIONS
Meet Magnavox at the Internet http://www.magnavox.com
1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any of the ventilation openings. Install in accordance with the manufacturerâs instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or AC Polarized grounding-type plug. A Plug polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong.The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
Finding a passage within a track 1. During playback, press and hold down â or Â§ y The CD is played at high speed and low volume; the display will show 'Cd:' and your current track number. 2. Release â or Â§ when you recognize the passage you want. y Normal CD playback and standby clock time resumes. RADIO
SETTING ALARM OPTIONS
Radio Alarm: If you have selected the radio alarm, make sure you have tuned properly to a station.
SWITCHING OFF ALARM
Gentle Wake Volume A sure way of getting up in the mornings, the gentle wake volume for the alarm begins from a fixed gentle volume (10) and gradually increases to a maximum higher setting of ( 25.) â¢ The default low volume is Lo : 10, and the maximum volume is HI : 25. â¢ During the alarm call, if you press 4 or 3, the volume stops increasing immediately. â¢ The gentle wake volume settings do not affect normal CD and radio playback volume level, unless you have pressed 4 or 3 during the alarm call. SWITCHING OFF THE ALARM There are three ways to switch off the alarm. Unless you cancel the alarm completely, the 24 HOUR ALARM RESET will be automatically selected after 59 minutes, from the time your alarm time first goes off.
CANCELING THE ALARM COMPLETELY To cancel the set alarm time before it goes off, or during the alarm call: â¢ Press AL1 or AL 2 once or more until the selected alarm indicator disappears from the display. y will hear a beep tone to confirm the alarm You has been cancelled.
SLEEP About Sleep The CD clock radio has a built-in sleep timer which enables the set to be automatically switched off during radio or CD playback after a set period of time. There are 3 sleep times: 60, 30 and 15 minutes. The sleep function does not change the operation of your alarm settings. Setting SLEEP 1. Press 2; (CD) or RADIO ON (radio) to switch on the desired mode. â¢ You can also press SLEEP if you want the timer in radio mode. 2. Select your timer option by pressing SLEEP once or more until the desired option is shown. â¢ Display shows SL: and the timer options: 60Âª 30Âª 15 minutes Âª 60Âª 30... 3. To cancel the timer function you can either: â¢ Press ALARM RESET. â¢ Press REPEAT ALARM/ BRIGHTNESS CONTROL. â¢ Press SLEEP once or more until the sleep function is no longer shown.
2. Read the following section if you want to select the WAKE-UP TRACK alarm option.
Selecting CD WAKE-UP Alarm Mode You can program and select a CD track number between 1-99, when the set is in the standby or radio playback mode. However, if the track number programmed does not exist on your CD, the CD will start playback from the first track during the alarm call. 1. Set the alarm time for AL1. 2. Insert a CD into the CD compartment.
13.Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
1. Press RADIO ON (FM/ AM) to switch on the radio. y Display shows 'tu' before returning to clock time. 2. Press RADIO ON (FM/ AM) again if you wish to change waveband. 3. Adjust the sound using 4 or 3 4. Adjust the TUNING wheel to tune to a radio
station. To improve reception: FM: Extend coil antenna at the back of the unit fully for optimum reception. AM: Uses a built-in antenna. Direct the antenna by adjusting the position of your set. 5. Press ALARM RESET to switch off. SETTING THE ALARM OPTIONS GENERAL Two different alarm times, AL 1 and AL 2 can be set in the CD, radio or buzzer modes. Selecting the Alarm Mode Options When selected, the selected alarm mode is shown in the display, and the respective AL 1 or 2 button lights up. 1. Select your choice of alarm mode. Either press briefly: â¢ AL1 once for CD alarm . This enables CD playback from the first track as your alarm call. â¢ AL2 once or more for radio / buzzer alarm
AL TIME 2
3. Press AL 1 to select CD alarm mode. 4. Press WAKE-UP TRACK to activate favorite track
programming. 5. Press â or Â§ until the desired track number is shown. 6. Press WAKE-UP TRACK to confirm the selected track number. y display returns to standby clock time. The 7. If you want to review your programmed track number, press WAKE-UP TRACK
15.Battery usage CAUTION â To
prevent battery leakage which may result in bodily injury or damage to the unit: q Install all batteries correctly, + and - as marked on the unit. q Do not mix batteries (old and new or carbon and alkaline, etc.). q Remove batteries when the unit is not used for a long time. EL 6475-E003: 01/6
24 HOUR ALARM RESET If you want the alarm mode to be stopped immediately but also wish to retain the same alarm
setting for the following day: â¢ Press ALARM RESET. y will hear a beep tone to confirm the 24 You hour alarm is reset.
CLASS 1 LASER PRODUCT
10.Protect the power cord from being
3140 115 2903.4 walked on or pinched particulary at plugs, convenience receptacles, and the point where they exit from the apparatus.
11.Only use attachments/accessories
specified by the manufacturer.
Note: â¢ The buzzer alarm option will automatically replace the CD alarm if you have: â inserted a CD incorrectly; â inserted a damaged CD; â forgotten to insert any CD; â not closed the CD door properly.
REPEAT ALARM This will repeat your alarm call at 9-minute intervals. â¢ During the alarm call, press REPEAT ALARM/ BRIGHTNESS CONTROL. â¢ Repeat if desired up to an hour. Note: â¢ The selected alarm mode , or indicators flashes throughout the repeat alarm duration. â¢ If you are using the CD alarm mode, CD playback resumes at the point where the repeat alarm interrupted. â¢ During the CD alarm, CD playback continues for up to an hour unless you cancel / reset the alarm.
Class II equipment symbol
Printed in China
This symbol indicates that the unit has a double insulation system.
One Year Free Exchange This product must be carried in for an exchange.
MAINTENANCE (see figure 2) General â¢ If you do not intend to use the CD clock radio for a long time, withdraw the AC-DC adapter plug from the wall outlet. â¢ Do not expose the set or CDs to humidity, rain, sand or excessive heat caused by heating equipment or direct sunlight. â¢ To clean the set, use a soft dry cloth. Do not use any cleaning agents containing alcohol, ammonia, benzene or abrasives as these may harm the housing.
TROUBLESHOOTING If a fault occurs, first check the points listed below before taking the set for repair. If you are unable to remedy a problem by following these hints, consult your dealer or service center.
TROUBLESHOOTING Continuous crackling/ hiss disturbance during AM broadcast â Electrical interference from TVs, computers, CAUTION Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.
5 4 3 2 1
6 7 8 9 0 ! @ # $ % ^ &
WHO IS COVERED? You must have proof of purchase to exchange the product. A sales receipt or other document showing that you purchased the product is considered proof of purchase. Attach it to this ownerâs manual and keep both nearby. WHAT IS COVERED? Warranty coverage begins the day you buy your product. For one year thereafter, a defective or inoperative product will be replaced with a new, renewed or comparable product at no charge to you. A replacement product is covered only for the original warranty period.When the warranty on the original product expires, the warranty on the replacement product also expires.
EXCHANGING A PRODUCT IN U.S.A., PUERTO RICO OR U.S.VIRGIN ISLANDS... Contact your dealer to arrange an exchange. Or, ship the product, insured and freight prepaid, and with proof of purchase enclosed, to the address listed below.
Small Product Service Center Magnavox Service Company 907 Snapps Ferry Road, Plant 2, Building 6 Greeneville,TN 37743 (In U.S.A., Puerto Rico and U.S.Virgin Islands, all implied warranties, including implied warranties of merchantability and fitness for a particular purpose, are limited in duration to the
fluorescent lamps, etc.
WARNING: Do not open the set as there is a risk of electric shock.
Under no circumstances should you try to repair the set yourself, as this will invalidate the warranty. No sound
â¢ Move set away from other electrical equipment The alarm does not function â Alarm time not set â¢ See section on SETTING THE CLOCK AND ALARM TIMES â Alarm mode not selected â¢ See section on SETTING THE ALARM OPTIONS
WHAT IS EXCLUDED? Your warranty does not cover: â¢ labor charges for installation or setup of the product, adjustment of customer controls on the product, and installation or repair of antenna systems outside of the product. â¢ product repair and/or part replacement because of misuse, accident, unauthorized repair or other cause not within the control of Magnavox. â¢ reception problems caused by signal conditions or â¢
duration of this express warranty. But, because some states do not allow limitations on how long an implied warranty may last, this limitation may not apply to you.) EXCHANGING A PRODUCT IN CANADA... Please contact Magnavox at: 1-800-661-6162 (French Speaking) 1-800-363-7278 (English Speaking) (In Canada, this warranty is given in lieu of all other warranties. No other warranties are expressed or implied, including any implied warranties of merchantability or fitness for a particular purpose. Magnavox is not liable under any circumstances for any direct, indirect, special, incidental or consequential damages, howsoever incurred, even if notified of the possibility of such damages.) REMEMBER... Please record the model and serial numbers found on the product below. Also, please fill out and mail your warranty registration card promptly. It will be easier for us to notify you if necessary.
nnecessary packing material has been omitted to make the packing easy to separate into 2 categones: cardboard and paper pulp. Your unit consists of materials which can be recycled if disassembled by a specialized company. Please observe local regulations on the disposal of packing materials and old equipment.
CD player and CD handling â¢ The lens of the CD player should never be touched! â¢ Sudden changes in the surrounding temperature can cause condensation to form and the lens of your CD player to cloud over. Playing a CD is then not possible. Do not attempt to clean the lens but leave the set in a warm environment until the moisture evaporates. â¢ Always shut the CD door to keep the CD compartment dust-free. To clean, dust the compartment with a soft dry cloth. â¢ To clean the CD, wipe in a straight line from the center towards the edge using a soft, lint-free cloth. Do not use cleaning agents as they may damage the disc. â¢ Never write on a CD or attach any stickers to it.
â Volume not adjusted â¢ Adjust the VOLUME No operation buttons function â Electrostatic discharge â¢ Disconnect the set from the power supply and reconnect the set after 5 minutes. CD playback does not work â CD badly scratched or dirty â¢ Replace/ clean CD â Laser lens steamed up â¢ Wait until lens has adjusted to room temperature â Laser lens dirty â¢ Clean lens by playing a CD lens cleaning disc â CD-R(W) is non-finalized â¢ Use a finalized CD-R(W) Occasional crackling sound during FM broadcast â Weak signal â¢ Extend coil antenna fully
cable or antenna systems outside the unit. a product that requires modification or adaptation to enable it to operate in any country other than the country for which it was designed, manufactured, approved and/or authorized, or repair of products damaged by these modifications. incidental or consequential damages resulting from the product. (Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you.This includes, but is not limited to, prerecorded material, whether copyrighted or not copyrighted.) a product used for commercial or institutional purposes.
WHERE IS EXCHANGE AVAILABLE? You may exchange the product in all countries where the
product is officially distributed by Magnavox. In countries where Magnavox does not distribute the product, the local Magnavox service organization will attempt to provide a replacement product (although there may be a delay if the appropriate product is not readily available). BEFORE REQUESTING EXCHANGE... Please check your ownerâs manual before requesting an exchange. Adjustments of the controls discussed there may save you a trip.
This warranty gives you specific legal rights.You may have other rights which vary from state/province to state/province. Service Solutions Group, P.O. Box 2976, Longview, Texas 75606, (903) 242-4800
EL6095T002 / MAC5433 / 1-97