Please tell us what you think and share your opinions with others. Be sure to focus your comments on the product. You will receive $2.00 of store credit for Your review.
Please tell us what you think and share your opinions with others. Be sure to focus your comments on the product. You will receive $2.00 of store credit for Your review.
Having bought a pre-owned Sony FM stereo tuner through eBay, it came without any manuals. It soon became clear that to get the best from this excellent tuner I needed a decent manual because much of the operation was not intuitive to a newboy to hi fi like me. I managed to download the official Sony multi-lingual manual from Owner-Manuals.com with no problem at all - a really quick and easy service. I'm very glad I did because I found out all the operations of the tuner and was then able to not only set it up quickly but also to get much more from it that poke-and-hope trialling would ever achieve. In my book $4.99 very well spent.
This manual is immaculate in it's accuracy. Everything is written very clearly and easy to understand. Written by a professional who wants to convey a clear and easy to understand message!!
Text excerpt from page 22 (click to view)
Troubleshooting
WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help. Problem Radio reception is poor. Solution � If the signal is too weak, adjust the antenna or connect an external antenna for better reception. � Increase the distance between the system and your TV or VCR. � Insert a disc. � Load in the disc with label facing up. � Replace or clean the disc, see �Care and safety information�. � Use a finalised CD-R(W) or a correct format disc. � Remove and reconnect the AC power cord and switch on the system again. � Use only NORMAL (IEC I) tape. � Apply a piece of adhesive tape over the missing tab space. � Remove and reconnect the AC power plug and switch on the system again. � � � � Adjust the volume. Disconnect the headphones. Check that the speakers are connected correctly. Check that the AC power cord is connected properly.
E n g l i s h
�NO DISC� is displayed or the disc cannot be played.
The system does not react when buttons are pressed. Recording or playback cannot be made.
The tape deck door cannot open.
Sound cannot be heard or is of poor quality.
The remote control does not function properly.
� Select the source (CD or TUNER, for example) before pressing the function button (� , � S, T). � Reduce the distance between the remote control and the system. � Replace the battery. � Point the remote control directly toward the IR sensor. � Set the clock correctly. � Press TIMER ON /OFF to switch on the timer. � If recording is in progress, stop the recording. � Press and hold DEMO STOP on the main unit to switch off the demonstration mode.
The timer is not working.
The system displays features automatically and buttons start flashing.