I PURHASED THIS PRODUCT BECAUSE I WAS HAVING PROBLEMS WITH MY CDR20 HARMAN KARDON RECORDER. WHICH I PURCHASED NEW 12 YEARS AGO. AFTER REVIEWING THE MANUAL, I WAS ABLE TO ADJUST THE TENSIONER IN THE SYSTEM. WORKS LIKE A CHAMP!.
SAVED ME AT LEAST 100.00 WHICH WAS WHAT A SERVICE REPAIR STATION WANTED. GREAT MANUAL EASY TO READ. SPECIALLY AFTER I PRINTED THE PAGES WHICH DEALT WITH MY RECORDER. THANKS A LOT!!!!!!!!
You can fully trust on this one!
All the schematics are very crear an in one piece per page
Text excerpt from page 9 (click to view)
Dismantling the 3CDC Module 1) Loosen the 4 screws, slide Cover top (pos 30) towards the rear and remove it upwards. 2) Loosen 3 screws slide the Panel right (pos 26) towards the rear and remove it outwards. Do likewise for the Panel left (pos 27). 3) Push the gear slowly towards the front as shown in figure 3 until the CDC tray starts to move out of the Front Cabinet (pos 8). The CDC tray is now disengage and can be pulled out completely. 4) Remove the Cover Tray (pos 29) as shown in figure 2. 5) Loosen 4 screws A to remove the CDC Module (pos 28) as shown in figure 1.
Dismantling of the Panel Rear
1) Loosen 6 screws C on the Panel rear (pos 24). 2) Press the 2 catches C1 inwards and dismantle the Panel rear by pulling it towards the rear.
Turn the Gear towards the Front till the CDC Tray starts to open