I purchased a copy of my old JVC VCR Service manual from Owner-Manuals.com
The copy was complete and valuable to me.
I was able to fix my VCR - it had a bad belt.
I am glad I found Owner-Manuals.com
Great Price. Thanks
Good quality, the manual help me to repair the echo/reverb section
Text excerpt from page 7 (click to view)
Dismantling of the Tuner Board and Main Board and AVC Board Dismantling of the Tuner Board and Main Board and AVC Board
1) Loosen 6 screws A to remove the Cover Top (pos 260). - 2 screws each on the left & right side (see Figure 1) - 2 screws on the rear (see Figure 2) - See Service position A
2) Remove 3 screws B and uncatch 2 catches B1 (see Figure 2) to loosen the Tuner Board (pos 1101).
3) Remove the Bracket PCB Mains (pos 259) by pressing the catch C1 inward and slide it up in the direction as shown in Figure 3.
4) Remove 1 screw C (see Figure 2) and uncatch 2 catches C2 (see Figure 4) to loosen the Main Board (pos 1104-B). - See Service position B
Figure 1 5) Remove 2 screws G (see Figure 4) to loosen the Bracket AV PCB (pos 255). 6) Remove 6 screws E and 2 screws F (see Figure 2) to loosen the Plate Rear (pos 251) and AVC Board (pos 1102). - See Service position D