I'm so glad I was able to find a site to download my missing manuals. Very reasonable prices and they kept me informed about the process and I had my manual within less than a day. The only thing I wish was an option is a 100% English version with no spanish or anything. But overall great site.
The manual is complete with excellent quality! One suggestion, show number of pages and weather it is multi-lingual. The AD 600 Manuel is about 76 pages and over half is non English. This results in a larger print job than usually needed. Having this information, one could select the desired pages for printing.
This is an excellent handbook. We had no information on the appliance until we obtained this and are now able to use the appliance to its full potential. Strongly recommended.
Text excerpt from page 47 (click to view)
XP cClear10 English (good) 24-07-2003 15:52 Pagina 47
The mouse cursor does not react when using the cursor control on the remote control
General: â¢ Check that the batteries have been installed properly in the remote control and/or replace the batteries. â¢ Check that the projector receives the signals from the remote control. â¢ Check that the USB cable or PS/2 cable has been properly connected. â¢ Check that both projector and computer are switched on. â¢ Unplug the USB cable or PS/2 cable and then reconnect.
In case of PS/2 connection: â The PS/2 mouse of the connected laptop has priority over the projector mouse loop through connection. â¢ Disable the PS/2 mouse of the laptop by selecting âDisable in hardware profileâ in the âWindows Mouse Propertiesâ of the laptop.Then restart âWindowsâ on the laptop. The projector mouse loop through connection now has priority while the laptop mouse can still be used. â¢ Switch off all devices and then reconnect while you make sure that you: â¢ connect the PS/2 cable to PC and projector before switching on the PC; â¢ switch on the projector before switching on the PC; â¢ do not connect the USB cable when making the PS/2 connection. Also refer to the User Guide or support information of your computer.
In case of USB connection: â¢ Connect another USB device (mouse, scanner, webcam, etc.) and see if it works. If it does not work there is a problem with the computer. â¢ Also refer to the User Guide or support information of the computer. â âWindowsâ did not manage to install the driver correctly. In this case the âDevice managerâ will contain a category âOther devices. â¢ Disconnect the projector. â¢ Remove all items listed under âOther devicesâ in the âDevice managerâ. â¢ Restart the computer. â¢ Reconnect the projector. In case the computer asks for monitor drivers, install the drivers on the CD-ROM supplied with the projector. In case the computer asks for a USB-device driver, install the required drivers on the CD-ROM supplied with the computer. The size of the image exceeds 128 KB. Reduce the size of the capture window. Select another image.
Computer asks for drivers
Image for personal startup screen cannot be loaded