This manual is very helpfull to use the Power Supply. All technical information has been available.
For service use the circuit diagrams are very good.
Thanks .
Very comprehensive document which is a must-have for any Satellit 2100 owner whose set up is somewhat intricate. Due to the bad quality of the pictures that are rather dark and a bit blurred I gave 4-star feedback.
The manual was missing 2 pages but when I presented the problem to the company they made every attempt to get the 2 pages to me, when they couldn't they refunded my money. A very pleasing and easy transaction. The manual they provided was the original, it was concise and to the point. I plan to do business with this company again when should the need arise.
Irrespectively of this manual exist only germany language, it's useful - although i need some additional task to translate: My english is bad, but usable - but i really dont speak germany. :)
Text excerpt from page 21 (click to view)
9. Maintenance
Lamp When operation time reaches the last 100 hours of the average lamplife, the message �Warning: lamplife has almost expired� will be displayed on the screen, each time the projector is switched on. The lamp indicator lights up orange. Lamp Replacement
�
Multimedia projectors Warning: Lamplife has almost expired It is suggested to have a spare lamp available. The lamp type is indicated in the user guide.
Caution! For cooling purposes the lamp is open. When removing the lamp do not tilt. If the inner tube is broken glass particles may fall out. Be very careful. The lamp and lampholder may still be too hot to touch. Keep lamp holder opening to your right. Do not touch lamp or point lamp holder opening at anyone. A high-pressure lamp may break if handled improperly.
� � �
The lamplife remaining can be checked using the OSD menu.
1. Press the Stand by button to switch off the projector. � The standby indicator lights up red. 2. Wait 5 minutes for the lamp to cool down and the cooling fan to stop and disconnect the mains lead and all other cables. 3. Turn the projector over. Never place the projector on the side where the connections are located! 4. Unscrew the screws at the bottom of the cover and remove the cover.
Display Language Keystone correction Start-up screen Lamp counter System information Factory reset (more)
PP AM
Picture
Audio
Settings
1. Press the Menu. � The menu bar appears on the screen. 2. Use Cursor Control to move the cursor to Settings. 3. Use Cursor Control to select Lamp counter.
� The remaining lamplife hours are displayed in the action window at the bottom of the screen. When the lamplife has expired,the lamp indicator lights up red and the message �Warning: lamplife has expired� is displayed on the screen.
Lamp 5 hours
Projector 2453 hours
FILTER
Lamp counter shows the operating hours of the lamp. It is suggested to reset when a new lamp is inserted. To reset keep OK key pressed for 3 seconds.
�
Multimedia projectors Warning: Lamplife has expired It is suggested to change the lamp, overall picture quality.
L A
5. Read the caution and warning labels on the lamp cover. 6. Unscrew the lamp holder.
