I purchased the unit from a private party and the original owners manual was not available. Having the ability to download it was extremely helpful and clarified operating the equipment immensely. This is a complicated unit and without the manual I would not have been able to maximize it's potential. Thank you.
Being a user of older radios of many kinds, preferring them over more modern rigs, this manual was invaluable in the programming of my two. I now know for certain what the assorted buttons functions are, and am very grateful to have found this excellent site. Many thanks for your assistance, Tony.
5 star quality on these downloadable manuals. Easy to read and all the information is there. A must when doing a custom install or needing to service your precious old school electronics.
Text excerpt from page 34 (click to view)
The mouse cursor does not react when using the cursor control on the remote control
General: â¢ Check that the batteries are installed properly in the remote control and/or replace the batteries. â¢ Check that the projector receives the signals from the remote control. â¢ Check that the USB cable or PS/2 cable has been properly connected. â¢ Check that both projector and computer are switched on. â¢ Unplug the USB cable or PS/2 cable and then reconnect.
In case of PS/2 connection: â The PS/2 mouse of the connected laptop has priority over the projector mouse loop through connection. â¢ Disable the PS/2 mouse of the laptop by selecting âDisable in hardware profileâ in the âWindows Mouse Propertiesâ of the laptop.Then restart âWindowsâ on the laptop. The projector mouse loop through connection now has priority while the laptop mouse can still be used. â¢ Switch off all devices and then reconnect while you make sure that you: â¢ connect the PS/2 cable to PC and projector before switching on the PC; â¢ switch on the projector before switching on the PC; â¢ do not connect the USB cable when making the PS/2 connection. Also refer to the User Guide or support information of your computer.
In case of USB connection: â¢ Connect another USB device (mouse, scanner, webcam, etc.) and see if it works. If it does not work there is a problem with the computer. â¢ Also refer to the User Guide or support information of the computer. â âWindowsâ did not manage to install the driver correctly. In this case the âDevice managerâ will contain a catagory âOther devices. â¢ Disconnect the projector. â¢ Remove all items listed under âOther devicesâ in the âDevice managerâ. â¢ Restart the computer. â¢ Reconnect the projector. In case the computer asks for monitor drivers, install the drivers on the CD-ROM supplied with the projector. In case the computer asks for a USB-device driver, install the required drivers on the CD-ROM supplied with the computer. The size of the image exceeds 128 Kb. Reduce the size of the capture window. Select another image.
Computer asks for drivers
Image for personal startup screen cannot be loaded