|
|
|
Who's Online
There currently are 5855 guests and
3 members online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Product was very good. Received quickly and complete
 ;
Although printing quality is not the best, the manual was very helpful in order to reactivate this ancient but still good electronic musical instrument.
;
as a first-time user and buyer from this site, i found the overall service outstanding!! this product is a godsend as, without it, i would never have been able to find my way around and use my machine as intended. i will certainly use this site again as required. many many thanx!!
;
This manual is exactly what I needed. This site always has every manual I need, and it is also much less expensive then most other sites. This is the only manual site I will use.
;
Useful manual, good scan, worth the pay if you find the unit difficult to operate.
- Put the iron back on its stand. Let it heat up again until the amber pilot light goes out. - Remove the iron from the stand and move it over a (preferably) old piece of cloth. This is to ensure that the soleplate will be dry during storage. - Unplug and allow the iron to cool down before storing it on the stand. Cleaning - Before cleaning remove the mains plug from the wall socket and allow the iron to cool down sufficiently. - Scale and other setting can be wiped off the soleplate with a damp cloth and some nonscratching (fluid) abrasive. Keep the soleplate smooth: avoid hard contact with metal objects. - The upper part of the appliance can be cleaned with a damp cloth. - From time to time clean the inside of the water reservoir by filling with water and shaking. Then pour the water back out. Storage � Always store the iron on the stand to prevent damage to the soleplate. - Remove the mains plug from the wall socket.
30
31
- Set the 3-positions switch to the storage position - (fig. 30). The iron, the power unit and the stand are then locked together. - You can wind the cord around the stand. With the cord clip you can fix the end of the cord (fig. 31).
32
33
- Unlock the stand clamp (S) (fig. 32). - Screw in the fixing screw completely (fig. 33).
34
35
27
28
CL
IC
K
- Set the steam control 29 (B) to position O (= no steam). - Set the 3-positions switch to position � (fig. 27). - Take the iron from the stand. Open the filling funnel and pour the remainder of the water out (fig. 28). - Place the iron back on the stand to cool down (fig. 29).
- Fold the stand clamp into the stand (fig. 34). - (Types HI 556/66 only:) First allow the iron to cool down. Then place the carry case over the stand. Press onto the case to lock it to the stand (�Click!�) (fig. 35).
9
|
|
|
> |
|
