PHILIPS HD7810/91
Owner's Manual

-

You can interrupt the brewing process at any time by pressing the on/off button I. If you switch the machine back on after you have interrupted the brewing process, the machine does not complete the interrupted brewing cycle.

8 Rinse the parts with fresh water after

cleaning and put them back into the machine.

8 Clean the pod holder after descaling to

Do not remove the water reservoir during a brewing cycle, as this causes the machine to draw in air. When this happens, the next cup will only be partly filled. Note: If you only get a small quantity of coffee or no coffee at all out of the machine, you have not flushed the machine properly before first use. As a result, the boiler is not or not completely filled. Flush the machine properly (see chapter �Preparing the machine for use�) before you brew another cup of coffee. machine and remove the coffee pod(s). Be careful when you do this, for there may still be some water/coffee on the coffee pod(s). , , , Tips Rinse the pod holders and the coffee spout regularly to make sure that the coffee always tastes optimally. The SENSEO® coffee tastes best if you stir it before you drink it. If you intend to make another cup of SENSEO® coffee later, just leave the coffee machine switched on. The machine automatically switches itself off after 1 hour. (Fig. 18)
10 After use, lift the pod holder out of the

cloth (Fig. 25). Be careful when you do this. Make sure that the rubber sealing ring does not get stuck under the edge of the water distribution disc. If it does, the coffee machine starts to leak! Flushing

9 Clean the water distribution disc with a moist

prevent the sieve in the centre from getting clogged. Frost-free storage

If the coffee machine has already been used and therefore has been flushed with water, it may only be used and stored in a frost-free place to prevent it from becoming damaged. Replacement You can order all removable parts from your Philips dealer or a Philips service centre. Environment , Do not throw away the machine with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preserve the environment (Fig. 27). guarantee & service If you need service or information or if you have a problem, please consult the worldwide guarantee leaflet or visit our website at www.philips.com. au or www.senseo.com. You can also contact the Philips Customer Care Centre in your country; they will be happy to help you. For Australia Customer Service telephone: Freecall�: 1800 794 329 You find the telephone numbers for other countries in the worldwide guarantee leaflet. If there is no Customer Care Centre in your country, turn to your local Philips dealer or contact the Service Department of Philips Domestic Appliances and Personal Care BV. You find their address and fax number in the worldwide guarantee leaflet. The purchase of the Philips SENSEO® coffee machine does not exhaust any of the rights of Sara Lee/Moccona or Philips under any of their patents nor does it confer upon the purchaser a licence under these patents. Troubleshooting If you have a problem, you may find the solution in the table below. If the table does not provide the solution to your problem or if you have a question, see the chapter �Guarantee & service�.

If you have not used the coffee machine for three days, flush it with fresh water before you use it again. Flush the machine in the following way:
1 Fill the water reservoir with cold water up to

the MAX indication and put it back onto the machine. (Fig. 3)

2 Put the 1-cup pod holder ° or the 2-cup

pod holder °° in the machine without pod(s). (Fig. 6)

3 Put a bowl (with a capacity of at least

1500ml) under the coffee spout to collect the water. (Fig. 8)

press the 1-cup button ° and the 2cup button °° briefly at the same time. (Fig. 9) The machine fills itself with water from the water reservoir. This takes some time and you will probably not notice that this happens. After a while, the machine starts to flush and switches itself off after the flushing cycle. Descaling Regular descaling prolongs the life of the coffee machine and guarantees optimal brewing results for a long time. If you use the machine twice a day on average, you must descale it once every 3 months. indication with descaler and water according to the instructions on the package of the descaler. Then put the water reservoir back onto the coffee machine. (Fig. 3) Use a descaler based on citric acid. The machine is ready for use when the indicator light burns continuously. machine, preferably with a used coffee pod in it. Close the lid and make sure it is properly locked. We advise you to put a used coffee pod in the pod holder when you descale the machine. This pod serves as a �filter� to prevent the sieve in the pod holder from getting clogged with scale residues.
4 Put a bowl with a capacity of at least 1500ml 3 Place the 1-cup pod holder ° in the coffee 2 Press on/off button I. (Fig. 10) 1 Fill the water reservoir up to the MAX

4 Press the on/off button I and subsequently

Cleaning Never immerse the SENSEO\ coffee machine in water. Never clean the machine by flushing it with the lid open. it.

1 Always unplug the machine before you clean 2 Clean the outside of the machine with a

moist cloth. ,
3 Remove the coffee spout (Fig. 19).

4 Clean the coffee spout, the pod holders

You can disassemble the coffee spout for more thorough cleaning. (Fig. 20) and the drip tray in hot water, if necessary with some washing-up liquid, or in the dishwasher (Fig. 21).

clean it with hot water, if necessary with some washing-up liquid (Fig. 22). You can also clean the cup tray in the dishwasher. To clean the cup tray, always remove it from the machine, as it might prove sharp when it is handled incorrectly. Always handle it carefully. necessary with some washing-up liquid, or in the dishwasher. (Fig. 23) Make sure the sieve in the centre of the pod holder is not clogged. If the sieve is clogged, unclog it by rinsing the pod holder under a running tap. If necessary, use a washing-up brush or a pin to unclog the sieve.
7 Clean the water reservoir in hot water, 6 Clean the pod holders in hot water, if

5 Hold the cup tray in your hand while you

under the coffee spout to collect the mixture of descaler and water. (Fig. 8)

machine operate. Repeat this until the water reservoir is empty. (Fig. 26) Never descale the SENSEO\ coffee machine with the lid open. Make sure the lid is properly locked.
6 Repeat steps 1 to 5 with a new mixture of

5 Press the 2-cup button °° and let the

if necessary with some washing-up liquid. (Fig. 24)

descaler and water.

Note:You can remove the cover of the water reservoir to clean the inside thoroughly. Note: If you use a washing-up brush, be careful not to damage the valve in the bottom of the water reservoir.
422200197772

7 Rinse the water reservoir with fresh water to

,

remove descaler residues. Flush the machine with fresh water at least 3 times by repeating steps 1 to 5. Do not refill the water reservoir with used hot water.

4/6