I purchased the unit from a private party and the original owners manual was not available. Having the ability to download it was extremely helpful and clarified operating the equipment immensely. This is a complicated unit and without the manual I would not have been able to maximize it's potential. Thank you.
Being a user of older radios of many kinds, preferring them over more modern rigs, this manual was invaluable in the programming of my two. I now know for certain what the assorted buttons functions are, and am very grateful to have found this excellent site. Many thanks for your assistance, Tony.
5 star quality on these downloadable manuals. Easy to read and all the information is there. A must when doing a custom install or needing to service your precious old school electronics.
Text excerpt from page 10 (click to view)
10
ENGLISH
during ironing), the calc-clean function should be used more frequently. 1 2 Make sure the appliance is unplugged. Set the steam control to position 0.
I N
3 Fill the water tank to the maximum level. Do not put vinegar or other descaling agents in the water tank.
LINEN
COTTON WOOL SILK NYLON
M
M AX
C
4 5 6
Select the maximum ironing temperature. Put the plug in an earthed wall socket. Unplug the iron when the amber temperature light has gone out.
C
Hold the iron over the sink, press and hold the calc-clean button and gently shake the iron to and fro. Steam and boiling water will come out of the soleplate. Impurities and flakes (if any) will be flushed out. 8 Release the calc-clean button as soon as all the water in the tank has been used up.
7
Repeat the calc-clean process if the iron still contains a lot of impurities.
After the calc-clean process
- Put the plug in the wall socket and let the iron heat up to allow the soleplate to dry. - Unplug the iron when it has reached the set ironing temperature. - Move the hot iron gently over a piece of used cloth to remove any water stains that may have formed on the soleplate. - Let the iron cool down before you store it.
Storage
1 Unplug the iron and set the steam control to position 0. Empty the water tank.
