PHILIPS FWD876/58
Owner's Manual

Clock/Timer Operations

876

SURROUND

Viewing the clock
The clock (if it is set) will be shown in Standby mode. Press CLOCK on the system to view clock in any source mode. Setting the clock - see Preparations.

deck .

3 4 5

Press O or P on the system (or on the remote control) to set the hours Press 1 or ¡ on the system (or on the remote control) to set the minutes. Press TIMER/SLEEP to store the setting. � �TIMER ON� will be displayed for 5 seconds. � The timer will start to work. � The timer will always be switched on once it has been set. Note: � The timer must be set in standby mode.

Setting the timer
The system can switch to DISC, TUNER , USB or TAPE mode automatically at a preset time, serving as an alarm to wake you up. IMPORTANT ! � Before setting the timer, ensure that the clock is set correctly. � The timer will always be switched on once set. � The timer will not start if a recording is in progress. � The time can be set in 24-hour mode.

To exit without storing the setting � Press 7 on the system. To deactivate the timer � When the timer has been set, press and hold TIMER /SLEEP for more than 3 seconds to enter timer setting mode, and then press and hold TIMER /SLEEP again for more than 3 seconds to deactivate the timer. ��TIMER OFF� will be displayed.

1

In standby mode, press and hold TIMER/SLEEP on the remote control more than 3 seconds . � The selected source will be displayed. Press DISC,TUNER , USB or TAPE/AUX to select timer mode. The corresponding source will appear on the display. DISC - load the disc. TUNER - Tune to the desired radio station. USB - Play USB directly. TAPE - Load the prerecorded tape into tape

2

43

English