Thanks to Owner-Manuals.com! This manual was exactly what I needed. As Amana was purchased by Maytag and later by Whirlpool, there was no way to receive it from their websites. I was lucky to find this resource.
Great to be able to set channels again, on an old but stoll fine working TV
Text excerpt from page 14 (click to view)
Connections
English
1
Use the component video cables (red/blue/ green) to connect the system�s Pr/Cr Cr/Cb Y jacks to the corresponding Component video input jacks on the TV set. To hear the sound of this DVD Player through your TV, use the audio cables (white/red) to connect LINE OUT (L/R) jacks of the DVD Player to the corresponding AUDIO IN jacks on the TV.
Using S-Video In jack
2
AUDIO IN
2
1
Using Video In jack (CVBS)
AUDIO IN
2 1
1
2
Use the S-Video cable (not supplied) to connect the system's S-VIDEO OUT jack to the SVideo input jack (or labelled as Y/C or S-VHS) on the TV set. To hear the sound of this DVD Player through your TV, use the audio cables (white/red) to connect LINE OUT (L/R) jacks of the DVD Player to the corresponding AUDIO IN jacks on the TV.
1
2
Use the composite video cable (yellow) to connect the system's VIDEO OUT jack to the video input jack (or labelled as A/V In, Video In, Composite or Baseband) on the TV set. To hear the sound of this DVD Player through your TV, use the audio cables (white/red) to connect LINE OUT (L/R) jacks of the DVD Player to the corresponding AUDIO IN jacks on the TV.
