perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Super nice! Good to have a manual in digital format.
Text excerpt from page 23 (click to view)
Recording
CD Synchro Start Recording 1
Load a blank tape into tape deck 2 and a disc into a disc tray. 2 Press CD to select CD mode. ¶ You can programme the tracks in the order you want them to be recorded (see Programming Tracks). If not, select the disc by pressing CD (CD 1�2�3) and the tracks are recorded according to the order on the selected disc. 3 Press RECORD to start recording. � The REC starts flashing. ¶ Disc will start playback automatically. 4 Press � to stop recording.
Recording from other sources
(only on tape deck 2) 1 Load a blank tape into tape deck 2 with the open side downward. 2 Press CD, TUNER or AUX. ¶ Start playback of the selected source. 3 Press RECORD to start recording. � The REC starts flashing. 4 Press � to stop recording. Notes: � During recording, it is not possible to listen to another source.
Dubbing tapes (from tape deck 1 to tape
deck 2) 1 Press TAPE ( TAPE 1�2 ) to select tape deck 2. 2 Load the prerecorded tape into tape deck 1 and a blank tape into tape deck 2 with full spool to the left. 3 Press DUBBING. � "DUB" with "2" scrolling right will be displayed. ¶ Dubbing will start immediately. � The REC starts flashing. 4 Press � to stop dubbing. Notes: � At the end of side A, flip the tapes to side B and repeat the procedure. � Dubbing of tapes is only possible from tape deck 1 to tape deck 2. � To ensure good dubbing, use tapes of the same length. � You can switch to other source while dubbing.
23
pg 01-28/C200/21-Eng 23 29/05/2001, 10:13 AM 3139