|
Who's Online
There currently are 5695 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
Once again owner-manual.com has saved the day for me, and come through with the manual I need. I looked other places too, and couldn't find it anywhere. Thank You owner-manual.com!!! You're the BEST!
;
very good quality that can be magnified several times, and it remains readable.
For sure I will return next time the need for a service manual arise.
;
The service manual is really great - thanks to it I was able to install the laser unit and thus "save" my CD-player, which seemed to be impossible before I had the manual.
;
Downloaded the Service manual OK of the Technics Piano and have now repaired it and its going fine. Excellant; thank you for the fine servce. A.M
;
This site is working fine! Did buy a manual for SX-EX25L and after a while I could download it and fix the problem. Nice and easy!
3-1
3-1
DISMANTLING HINTS
Dismantling of Front Dismantling of mono board
1) Remove front . See picture 1 2) Remove whole front (disconnect the wires on the mono board coming from front)
Service position monoboard
1) Bring front in position as shown in picture 6 2) Snap nok of front in bottom to make front stable . See picture 7 3) Connect front wiring back to monoboard. *The tuner module doesn't have to be connected. Use an other source (pe.CD)
Power rod 1 snap 1 1
1
snap 2 2 2 2 3
picture 3 picture 7
2
3) Remove 14 x screws shown in mentionned aria . See picture 3
snap snap
picture 1
1) Remove top cover 2) Remove power rod 3) Remove 6 x screw as shown in picture 1 4) Release two snaps (left & right side front) 5) Release two snaps on the bottom side front 6) Tipp down front as shown in picture 2
cable-sleeve
picture 6
Service position main trafo
1
1
1
1
1
1 1
1 2
Metal bracket 1 1
picture 4
picture 2
4) Remove wires out the cable-sleeve. 5) Remove 7 x screw and remove metal bracket 6) Remove 2 x screw on mono board . See pictue 4 7) Remove mono board as shown arrow 1 & 2 . See picture 4 8) Bring the mono board in the service position as shown in picture 5
picture 9 1) Put main trafo as shown in picture 9
Handling service cover Dismantling of mainstrafo
1 1 1
1
1 1
1 1 1 1
picture 5
Legend
1 1
1
1
1
picture 10 picture 8 1 2 = Torx M3x6mm ( screw with big head ) = Torx 3x10mm 3 = Torx M3x6mm 1) To open the service cover cut 14 x lugs between cover and bottem . See picture 10 ( 2) To close the service cover put 11 x screw in mentionned holes. See picture 10 Service codenumber 12x Torx M3x6mm screw with big head = 4822 502 14659
PCS 102 488
1) Remove power rod 2) Remove 4x screw as shown in picture 8
)
|
|
|
> |
|