I purchased a copy of my old JVC VCR Service manual from Owner-Manuals.com
The copy was complete and valuable to me.
I was able to fix my VCR - it had a bad belt.
I am glad I found Owner-Manuals.com
Great Price. Thanks
Good quality, the manual help me to repair the echo/reverb section
Text excerpt from page 7 (click to view)
2-1
2-1
DISMANTLING INSTRUCTIONS
Dismantling of the DVD Loader Dismantling of the AV Board, SD6.1 PL 6CH Board and PSU Board
1) The tray can be manually open by inserting a minus screw driver and push the lever in the direction as shown in Figure 1 to unlock the tray before sliding it out. 2) Slide out the tray and remove the Tray Front assembly (pos 110 + pos 111) as shown in Figure 2.
3) Loosen 5 screws to remove the Cover Top (pos 240). - 1 screw each on the left & right side - 3 screws on the rear
1) Loosen 7 screws A (see Figure 3) and uncatch 2 catches C1 (see Figure 4) to remove the AV Board (pos 1001). 2) Loosen 4 screws D (see Figure 4) to remove the SD6.1
3) Loosen 2 screws E and uncatch C2 (see Figure 4) to remove the PSU Board (pos 1004).
4) Loosen 4 screws B (see Figure 4) to remove the DVD Loader.
