There are currently no product reviews.
perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Well Well Well!!!! Good manual perfect for my hobby!!! As Before you have done a very well done work!!!! Thank you
Super nice! Good to have a manual in digital format.
Great job supplying the manual.
Many of these products weerepretty obscure, so it was great that you had
the manual for it!
Great manual, would not have been able to operate my machine without it!!
James Dawson August 18, 2012
18 Disc Playback
Before you begin, turn on the TV, Stereo, and other equipment connected to the DVD/VCR. Make sure the TV and the Stereo (if applicable) are set to the correct channel. Details are on pages 6-14.
1 2 5
1 2 3 4 5 6
Press STANDBY-ON y to turn on the DVD/VCR.
A-B ZOOM ANGLE SKIP / CH
TITLE CLEAR/RESET SLOW
Press DVD so the DVD light appears on the front of the DVD/VCR. Press OPEN/CLOSE A (to the left of the disc tray on the front of the DVD/VCR) to open the Disc tray. Place a Disc into the tray. If the DVD is recorded on only one side, place the Disc in the tray with the label facing up and the shiny side facing down. Some DVDs are recorded on both sides. Make sure the label of the side you want to play is facing up. Press PLAY B. The tray will close and play will begin at the first Chapter or Track. If a DVD menu appears instead, see page 47. With some Audio CDs, playback will not begin unless you press PLAY B. Or, press OPEN/CLOSE A or press the tray toward the DVD/VCR to close the tray. With MP3 and JPEG files, playback will begin from the beginning of the disc. Press STOP C to stop playback.
VCR DISC/VCR MENU
DVD SYSTEM MENU
6 3 4
STOP TIMER SET
Press OPEN/CLOSE A on the DVD/VCR. Insert a Disc.
â¢ An âXâ may appear at the top right corner of the TV screen when you try a feature. Either the feature is not available on the Disc, or the DVD/VCR cannot access the feature at this time.This does not indicate a problem with the DVD/VCR. â¢ If a Disc is dirty or scratched, the picture may appear distorted or playback may stop. Remove the Disc and turn off the DVD/VCR. Disconnect the power cord, then reconnect it. Clean the Disc, then turn on the DVD/VCR again and reinsert the Disc for playback. â¢ When the DVD or CD light appears on the display panel, the Disc is loaded and ready for playback. â¢ When you press OPEN/CLOSE A or PLAY (DVD) on the front of the DVD/VCR when the power is off, the DVD/VCR will turn on in DVD mode. Otherwise, the DVD/VCR will turn on in the mode in which it was turned off.
Remember, this DVD/VCR will play only certain Discs. See page 5 for details.