|
Who's Online
There currently are 5907 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
Superb! It's the original manual. We can now use our old calculator with its full function.
;
This is a very well written and comprehensive manual. It answered all our queries.
;
Excellent copy that was delivered within 12 hours and solved my problem.
;
I did not have the manual for a Whirl Pool gas dryer, therefore I purchased it from Owner-manuals. This is exactly what I needed. Thank you for the service.
;
I was so pleased to get the owner`s manuel within one hour! Thanks again.
Regards
Werner
Connecting with a scart cable and 'Easy Link'
Your DVD recorder can exchange information with your TV set using 'Easy Link'. Your TV channels can also be transferred in the same order from your TV set to your DVD recorder using 'Easy Link'.
Have the following cables ready: an aerial cable (1, supplied), a mains cable (2, supplied), a special (full) scart cable (3, suitable for Easylink).
1 2
Switch off your TV set. Remove the aerial cable plug from your TV set. Insert it into the ANTENNA socket at the back of the DVD recorder.
3
Insert one end of the supplied aerial cable into the TV socket at the back of the DVD recorder and the other end into the aerial input socket at the back of the TV set.
4
Plug a special (full) scart cable (for Easylink) into the scart socket EXT 1 TO TV-I/O at the back of the DVD recorder and the corresponding scart socket at the back of the TV set (see TV set operating instructions). Switch on the TV set. Insert one end of the supplied mains cable into the mains socket 4MAINS at the back of the DVD recorder and the other end into the wall socket.
5 6
7
EasyLink loading data from TV; please wait
A message appears on the screen announcing that the transfer has started. 'EASYLINK' appears on the display during transfer. The TV set transfers all stored TV channels, in the same order, to the DVD recorder. This may take several minutes. After the data transfer has been completed, the following appears on the screen: 'EasyLink loading complete'.
8
14
Connecting the DVD recorder
|
|
|
> |
|