The Owner's manual was very helpful. The WEGA is about 35 years old and needed repair.
Your Website is pretty good und easily to handle.
Text excerpt from page 26 (click to view)
Control TV Programmes
Viewing live TV
About Time Shift Buffer temporary HDD storage
The current TV programme will be stored in the temporary hard disk storage called âTSBâ (Time Shift Buffer) once the recorder is turned on. It continuously stores up to 6 (six) hours of TV programmes. The Time Shift video bar indicates the status and timing of the stored TV programmes.
PAUSE LIVE TV
SUBTITLE INFO SELECT EDIT
A Turn on the TV. If necessary, switch the
TV to the correct input channel for viewing the recorderâs playback.
B Press STANDBY-ON 2 to turn on
this recorder. You should see the TV programme on the TV. If not, press LIVE TV.
C Press P +/â to select a desired channel.
The TV programme you are tuned to is automatically stored in the Time Shift Buffer. This allows you to pause the live TV and resume playback at any time. If you switch to another TV channel on the recorder, a new title will be created and a vertical line will be shown on the Time Shift video bar.
The Time Shift video bar consists of the following information:
a The TV programme start time. b c d e
Once it has exceeded 6 (six) hours, the start time will be changed accordingly. Clips that are selected to be recorded onto the hard disk (marked Red). Title markers (when you switch to a TV channel for more than 2 minutes, a new title marker will be created). Current position and time of the TV programme broadcast. Present time Helpful Hint: â The Time Shift Buffer stores and retains up to the last 6 (six) hours of TV programmes when the recorder is turned on. If you switch the recorder to standby mode, all the contents in the Time Shift Buffer will be cleared.
You can choose to display or hide the Time Shift video bar by pressing the INFO on the remote control.