perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Great manual, would not have been able to operate my machine without it!!
James Dawson August 18, 2012
Text excerpt from page 13 (click to view)
1. If you have the welcome message on-screen at the moment, press the SELECT button on your remote. If you allready have the main menu go to step 3.
2. Choose option 5 getting started using the DOWN ARROW button, and press the SELECT button.
The receiver will start to search for all available channels, as indicated on-screen. 3. If you already had the main menu on-screen Choose option 5 getting started in the same manner as above. Highlight the store channels option using the DOWN ARROW button and press the SELECT button. Press the SELECT button again, the receiver will start to search for all available channels, as indicated on-screen.
During the installation process the display on screen will indicate the number of channels that have been found and the percentage of the installation that has been completed. You will also see the message Your ONdigital box is searching for all available channels � this may take about 20 minutes � please wait. When complete, the display will briefly show 100%, the number of channels that have been found and indicates that these are being stored. It will then display a list of channels. � Press the UP or DOWN button to highlight the channel you want to watch followed by the SELECT button to watch that channel.
