perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Super nice! Good to have a manual in digital format.
Text excerpt from page 8 (click to view)
TUNER 1 Press TUNER/AUX once to switch on the radio (FM only). � Display shows the radio frequency of the last selected waveband. Your preset station is also shown if you are listening to a preset. (See 2) 2 Adjust the sound using VOL+/-. 3 To select preset stations, press the respective PRESET button (1-5). TUNING TO RADIO STATIONS 1 Press and hold ¡1 / 2� until the frequency in the display starts changing. �Display shows �Scrh� during automatic tuning. �After the system tunes to a station of sufficient reception, display shows its frequency. � To tune to a weak station, press ¡1 / 2 � briefly and repeatedly until an optimal reception is found. To improve reception (FM): Extend and position the pigtail fully to obtain optimum reception. STORING AND USING PRESET STATIONS You can store up to 5 FM radio stations in the memory. 1 Tune to your desired station (see TUNING TO RADIO STATIONS). 2 To store a preset, hold down briefly on a PRESET button 1-5 until you hear a double beep. � Display shows the preset number of your station. 3 Repeat steps 1 and 2 to store your other stations. � You can overwrite a preset station by storing another frequency in its place. 4 Press a PRESET button 1-5 (or PRESET 4 / 3 on the remote control) to listen to a preset station. � To display clock time, press 2; on the set. USING THE ALARM GENERAL Two different alarm times can be set. This can be useful when you need to be woken up at a different time e.g. during the week and at the weekend, and you can set different wake-up modes: � tuner mode. � buzzer mode. The gentle wake buzzer alarm increases its beep tone frequency within seconds. � dock mode (only for Apple iPod and Philips GoGear SA9100 and SA9200)