|
Who's Online
There currently are 5676 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
fast response great copy easy to download quick to correct mistakes
;
This manual provided the necessary information to properly use the C-3 deck. The manual was an excellent reproduction and very clear.
;
Product was very good. Received quickly and complete
;
Although printing quality is not the best, the manual was very helpful in order to reactivate this ancient but still good electronic musical instrument.
;
as a first-time user and buyer from this site, i found the overall service outstanding!! this product is a godsend as, without it, i would never have been able to find my way around and use my machine as intended. i will certainly use this site again as required. many many thanx!!
10 ENGLISH
ENGLISH 11
combs should be cleaned in a degreasing liquid (e.g. Norelco Razor Cleaner, Model RC1776, or alcohol) and lubricated with Norelco Razor Lubricant, model AL80, or one drop of mineral oil (in the center of the head).
4
Remove and clean one set of heads at a time. Separate the cutter from the comb and rinse clean under hot water.
C
5
Every Six Months:Trimmer
1 Turn razor OFF. 2 Push Trimmer Slide Switch up to pop up Trimmer.
� Do not clean more than one cutter and comb at a time, since they are all matching sets. If you accidentally interchange the cutters and combs, it could take several weeks before optimal shaving performance is restored.
C
6 Replace the set back into the Head Assembly in such a way that the sides with the little holes point to the middle of the shaving unit. � Make sure that the two pointy edges of the head fit exactly into the recesses. 7 Repeat the process for the other two sets of cutters and combs. 8 Replace the frame.
C
3 Clean Trimmer with the brush.
C
4 Lubricate the Trimmer teeth with Norelco Razor Lubricant (model AL80) or with one drop of mineral oil. 5 Close Trimmer by sliding Trimmer switch down. This razor has no other user-serviceable parts. Any other service should be performed by an Authorized Norelco Service Location.
C
9 Press down and turn wheel clockwise until it locks into place.
10 Replace the Razor Head Assembly back on
razor. � If the razor heads have been properly inserted, a shiny circle is visible in the middle of the razor head assembly.
Once A Month: Razor Heads
� For optimum performance, razor cutters and
|
|
|
> |
|