perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Insert the plug into the headphone socket L at the right side of the TV. Press ¬ on the remote control to switch off the internal speakers of the TV. The headphone impedance must be between 8 and 4000 Ohms. The headphone socket has a 3.5 mm mini stereo jack. In the SOUND menu select Headphone volume to adjust the headphone volume.
VCR/Cable Converter Box
IR SHOOTER
AV 3
IN Pr Pb Y VIDEO L AUDIO R AUDIO S VIDEO
The Infrared - IR Blaster cables supplied enable you to make timed program recordings between the GUIDE Plus+ system and accessory VCRs/Cable Converter boxes. The IR Blasters work as small sized remote transmitters to turn on and select channels on the VCR and Cable convertor box in order to accomplish a timed VCR Plus+ recording. See GUIDE Plus+, p. 34.
Insert the connector end of the supplied Y-shape IR Shooter cable into the GUIDE Plus+ IR SHOOTER output jack on the rear of the TV (where you removed the Demo Pin). Position the control (transmitter) ends of the IR blaster under the front edge of the accessory VCR or Cable Converter. Two transmitting blasters are provided for those who have both a VCR and an accessory Cable Converter box. Be sure that the transmitting end of the IR blaster is facing up, ready to transmit into the front of the remote sensor window on the VCR or Cable Converter box. The IR Blaster should be positioned out as far from the front of the VCR or Cable Box as possible.
