|
|
|
Who's Online
There currently are 5898 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Absolutely perfect! I've been trying to understand how to use all or at least some of the features of the receiver and especially the remote.
;
Copy of genuine owners/operators manual, very useful
;
The manual was a perfect match and was exactly what I was looking for. I'm very satisfied with my purchase.
;
Thank you for having the manual I needed for an older model Aiwa stero I had found on Ebay --- I wanted the Aiwa because I had tapes and cd's but I did not have a manual as to how to operate the system... I found what I needed and it has enabled me to set the system up for my enjoyment.
;
I wished detailed information of the JBL S310 and here I found it! Very happy with the service from this site!
1015.5 en
12-11-2003
11:12
Pagina 3
Use of the remote control
VGA
press repeatedly to select your computer connected to the VGA 1 or 2 connector or to the DVI-D connector.
AV1, AV2, AV3
press to select the peripherals connected to the connector indicated on the monitor. Note: in case the monitor is operating in combination with an electronic receiver box, the AV inputs on the monitor will be disabled and the VGA2 connector becomes an output.
VGA AV1 AV2
POWER
B
AV3
to switch to standby or on again
B
BRIGHTNESS
CONTRAST
ZOOM ON/OFF
ZOOM IN
ZOOM OUT
MENU
to switch the menu on/off cursor buttons to select your choice and to alter a selected adjustment.
MENU
OK
BRIGHTNESS +/-
OK to activate your choice
to adjust the brightness level of the picture
CONTRAST +/-
to adjust the contrast level of the picture
V
ZOOM ON/OFF
MUTE
V press - or + to adjust the volume
CH/PR
¬
to activate/de-activate the zoom function. See p. 5.
ZOOM IN/OUT to adjust the zoom factor
¬ Mute button Mute the sound or restore it
1 4 7
AV MUTE
2 5 8 0
3 6 9
q
CH/PR Program selection To browse through the sources selected.
and to change the magnification of the picture when zoom is activated. See p. 5.
AV MUTE to mute the picture and the
sound or restore it (if the monitor is used in monitor mode). When activated a green indicator starts blinking in front of the monitor. q Picture format See Picture 2 menu, p. 5. Press the q button to switch between the different picture formats.
On screen information When the monitor is used in the monitor mode, information about the active source (AV1, AV2, AV3, VGA1, VGA2 or DVI-D), and the supported video,VGA or HD-format of the selected source is displayed on the screen together with the selected picture format and icons informing about selected sound mode and AV or audio mute.
Use of the remote control
3
|
|
|
> |
|
