thanks for this download i got a pioneer bdp-lx70a blu-ray player and it had no manual i search everywhere on the internet and came across owner-manuals.com and i found that it was so easy to find and downloaded from this site if i ever need a manual again this would be the first place that i would come too thanks guys
I did not have the manual for a Whirl Pool gas dryer, therefore I purchased it from Owner-manuals. This is exactly what I needed. Thank you for the service.
Select the menu language
1 Press the MENU button on the remote control. 2 Use the cursor down to select Install in the Settings menu.
3 Use the cursor right to enter the Install menu. 4 Select Language and enter the list of available languages with the
cursor right. 5 Select your preferred language with the cursor up/down and press the OK button to con�rm your selection. 6 Proceed with the Install menu.
Press the MENU button on the remote control. Use the cursor down to select Install in the Settings menu. Use the cursor right to enter the Install menu. Press cursor down to select Auto store in the Install menu. to start scanning of channels.
5 Use the cursor right to enter the Auto store menu and press OK
Auto storing may take up to 3 minutes to complete. Please wait until Auto storing is completed . The TV will then switch automatically to the �rst channel found.
Notes: � Immediately after unpacking and plugging in your new television, run the auto store function to set up the TV for the broadcast or cable channels available in your area. If you do not run the auto store function to set up the channels, your television may not operate properly. � After you�ve run Auto store, check out the results. Press P (+) or the P (-) button and see which channels you can select. � Remember, an antenna or cable TV signal must �rst be connected to your LCD TV.
