|
Who's Online
There currently are 260 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
 |
|
There are currently no product reviews.
 ;
Found this to be the manual included with the original packinging, was helpfull but did not give any detailed repair instructions.
 ;
Complete service manual, was very helpful in repairing this tapedeck.Thanks.
 ;
The service manual was a copy of the original from Wirlpool. The quality was good, all neccecary information was available including the service-codenumbers, so I could order the right part to be replaced for repair.
Downloding was no probem after the payment.
Thanks for the service!
 ;
Good,readable manual. I found other manuals that were not readable when it came to part ID, but the one downloaded from owner-manual.com was better than expected. I will do buisness with owner-manual.com again.
 ;
Service Manual that I received was very helpful to me. Thank you.
Electrical Alignments
8.4.4 OPT. NO. (Option numbers) Select this sub menu to set all options at once (expressed in two long strings of numbers). An option number (or option byte) represents a number of different options. When you change these numbers directly, you can set all options very fast. All options are controlled via eight option numbers. When the EAROM is replaced, all options will require a resetting. To be certain that the factory settings are reproduced exactly, you must set both option number lines. You can find the correct option numbers on a CRT sticker inside the TV set. Example: The CRT sticker gives the following option numbers: 04187 08526 50001 00000 04182 00001 00000 00070 The first line (group 1) indicates options 1 to 4, the second line (group 2) options 5 to 8 (see tables below). Every 5-digit number represents 16 bits (so maximum number can be 65536 if all options are set). When all the correct options are set, the sum of the decimal values of each Option Byte (OB) will give the option number.
EM5.1E
8.
EN 109
|
|
 |
> |
|