There are currently no product reviews.
Manual is actually a pack of schematics, good quality pictures.
Great service. Manual delivered at a great price. Reliable delivery service. They have a great selection. A recommended service!
I used your service and I found myself well I need service manual teac v plate 770 and I was able to access and remove the belt that erno routes. thanks I recommend it to all
At first I thought there had been a mix up as I required the service manual for the cassette unit and the one supplied was for the CD unit. However when I scrolled further down I realised that both had been scanned together! This enabled me to dismantle and repair the cassette unit as intended and I also have a copy of the manual for both the CD and graphic equaliser units should I ever need them. Thanks very much for a great service.
Excelent service, the manual is complete, very cheap and fast
Go to cover page
Definition of Pixel Defects
3. Pixel Defect Tolerances In order to qualify for repair or replacement due to pixel defects during the warranty period, a TFT LCD panel in a PHILIPS flat panel monitor must have pixel or subpixel defects exceeding the tolerances listed in the following tables.
This section explains the different types of pixel defects and defines acceptable defect levels of each type. In order to qualify for repair or replacement under warranty, the number of pixel defects on a TFT LCD panel must exceed these acceptable levels.
1. Definition of Pixels and Subpixels
A pixel, or picture element , is composed of three subpixels in the primary colors of red, green and blue. Many pixels together from an image. When all subpixels of a pixel are lit, the three colored subpixels together appear as a single white pixel. When all are dark, the three colored subpixels together appear as a single black pixel. Other combinations of lit and dark subpixels appear as single pixels of other colors.
BRIGHT DOT DEFECTS MODEL 1 lit sub pixel 2 adjacent lit sub pixels 3 adjacent lit sub pixels (one white pixel)
ACCEPTABLE LEVEL 300WN5 3 or fewer 0 0
Distance between two bright dot defects* Total bright dot defects of all types
25 mm or more
2 or fewer
BLACK DOT DEFECTS
ACCEPTABLE LEVEL 300WN5 5 or fewer 1 or fewer 0 15 mm or more
2. Types of Pixel Defects
Pixel and subpixel defects appear on the screen in different ways. Bright dot defects Bright dot defects appear as pixels or subpixels that are always lit or "on"â€¯. These are the types of bright dot defects:.
1 dark sub pixel 2 adjacent dark sub pixels 3 adjacent dark sub pixels Distance between two black dot defects*
One lit red, green or blue subpixel
Total black dot defects of all types TOTAL DOT DEFECTS MODEL Total bright or black dot defects of all types
5 or fewer
Two adjacent lit subpixels: - Red + Blue = Purple - Red + Green = Yellow - Green + Blue = Cyan (Light Blue)
ACCEPTABLE LEVEL 300WN5 5 or fewer
Three adjacent lit subpixels (One white pixel)
Note: 1 or 2 adjacent subpixel defects = 1 dot defect
Black dot defects Black dot defects appear as pixels or subpixels that are always dark or "off"â€¯TThese are the types of black dot defects:
One dark subpixel
Two or three adjacent dark subpixels