There are currently no product reviews.
Manual was reasonably easy to follow. I am not an engineer or know much about electronics but with the manuals help I was able to figure out the problem, identify the part required for the repair. Replacement part cost around $30. Whilst replacing the part I was telling myself, "this aint gonna work cos it seems far too easy". Took about 15 minutes to do and my plasma TV works a treat. Would never have been able to do this without the service manual.
It is OK, this manual help me to repair my dynacord
Good manual. Even it is an old printed manual, it is well scanned and complete, with all drawings, schematics and parts list. Very good return for the cost.
I'm very satisfied with my purchase. It resolved my problem. Owner-manuals.com is a very very good place.
Veramente completo, dettagliato e perfetto nella visione. Perfect, thanks!
Go to cover page
Definition of Pixel Defects
3. Pixel Defect Tolerances In order to qualify for repair or replacement due to pixel defects during the warranty period, a TFT LCD panel in a PHILIPS flat panel monitor must have pixel or subpixel defects exceeding the tolerances listed in the following tables.
This section explains the different types of pixel defects and defines acceptable defect levels of each type. In order to qualify for repair or replacement under warranty, the number of pixel defects on a TFT LCD panel must exceed these acceptable levels.
1. Definition of Pixels and Subpixels
A pixel, or picture element , is composed of three subpixels in the primary colors of red, green and blue. Many pixels together from an image. When all subpixels of a pixel are lit, the three colored subpixels together appear as a single white pixel. When all are dark, the three colored subpixels together appear as a single black pixel. Other combinations of lit and dark subpixels appear as single pixels of other colors.
BRIGHT DOT DEFECTS MODEL 1 lit sub pixel 2 adjacent lit sub pixels 3 adjacent lit sub pixels (one white pixel)
ACCEPTABLE LEVEL 300WN5 3 or fewer 0 0
Distance between two bright dot defects* Total bright dot defects of all types
25 mm or more
2 or fewer
BLACK DOT DEFECTS
ACCEPTABLE LEVEL 300WN5 5 or fewer 1 or fewer 0 15 mm or more
2. Types of Pixel Defects
Pixel and subpixel defects appear on the screen in different ways. Bright dot defects Bright dot defects appear as pixels or subpixels that are always lit or "on"â€¯. These are the types of bright dot defects:.
1 dark sub pixel 2 adjacent dark sub pixels 3 adjacent dark sub pixels Distance between two black dot defects*
One lit red, green or blue subpixel
Total black dot defects of all types TOTAL DOT DEFECTS MODEL Total bright or black dot defects of all types
5 or fewer
Two adjacent lit subpixels: - Red + Blue = Purple - Red + Green = Yellow - Green + Blue = Cyan (Light Blue)
ACCEPTABLE LEVEL 300WN5 5 or fewer
Three adjacent lit subpixels (One white pixel)
Note: 1 or 2 adjacent subpixel defects = 1 dot defect
Black dot defects Black dot defects appear as pixels or subpixels that are always dark or "off"â€¯TThese are the types of black dot defects:
One dark subpixel
Two or three adjacent dark subpixels