This manual is very helpfull to use the Power Supply. All technical information has been available.
For service use the circuit diagrams are very good.
Thanks .
Very comprehensive document which is a must-have for any Satellit 2100 owner whose set up is somewhat intricate. Due to the bad quality of the pictures that are rather dark and a bit blurred I gave 4-star feedback.
The manual was missing 2 pages but when I presented the problem to the company they made every attempt to get the 2 pages to me, when they couldn't they refunded my money. A very pleasing and easy transaction. The manual they provided was the original, it was concise and to the point. I plan to do business with this company again when should the need arise.
Irrespectively of this manual exist only germany language, it's useful - although i need some additional task to translate: My english is bad, but usable - but i really dont speak germany. :)
Text excerpt from page 31 (click to view)
27
TROUBLESHOOTING
Remote Does Not Work �Check the batteries. If necessary, replace them with 2 AA Heavy Duty (Zinc Chloride) or Alkaline batteries. �Clean the remote control and the remote control sensor window on the TV. �Check the TV power cord. Unplug the TV, wait 10 seconds, then reinsert the plug into the outlet and push the POWER button again. �Be sure the fuse is not blown on the AC power strip, if one is being used. �Check to be sure the TV outlet is not on a wall switch. TV Displays Wrong Channel or No Channels Above 13 �Repeat channel selection. �Add the desired channel numbers (using the CHANNEL EDIT control) into the TV�s memory. �Check to be sure the TUNER MODES are set to the CABLE option and run the Auto Program feature to find all available channels.
No Power �Check the TV power cord. Unplug the TV, wait 10 seconds, then reinsert the plug into the outlet and push the POWER button again. �Check that the outlet is not on a wall switch. �Be sure the fuse is not blown on the AC power strip, if one is being used. No Picture �Check antenna connections. Are they properly secured to the TV's ANT 75� plug? �Check the TUNER MODE control for the correct tuner setting. �Try running the Auto Program feature to find all available channels. �Press the CH+ or CH- buttons on the remote to make sure the correct signal source is selected (FRONT or Current Channel). No Sound �Check the VOLUME buttons. �Check the MUTE button on the remote control. �If you�re attempting to hook up auxiliary equipment, check the audio jack connections located on the front of the TV.