|
|
|
Who's Online
There currently are 6035 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
High quality scan of the manual, very quick and easy download and very important, a truly honest price. thanks
 ;
Minden rendben, de két megjegyzés, az ábrák nehezen kivehetők és a fizetés után 24 órát kell várni a letöltésre.
;
Manual correct, and complete. Downloads cleanly. Format of manual was presumably difficult to PDF to A4, but works reasonably well.
;
This was a hard to find manual. When I did find it , some sites wanted way too much for the file.
Owner-manual .com had it for a really reasonable price. Not only that but it was sent very quickly and was a quality scanned document, unlike some others I purchased from a different site.
Good job guys!!
Larry
;
Fast and courteous service. Product delivered as described. Thank you.
How to Use the On Screen Display (OSD)
Front Panel Control / Main Menu
Volume
To adjust your monitor�s volume, follow the steps below. The volume control adjusts the sound from the two frontmounted speakers or the earphones jack.
Mute
To completely turn off the volume (but still return to the former level), follow the steps below. The mute control turns off the sound from the two front-mounted speakers or the earphones jack. Note: audio is muted from monitor speakers when earphones are connected. See pages 2 and 16 for details.
1
Press the Volume button (first one from the left) on the front of the monitor.
1
Press the ON SCREEN DISPLAY button.
The Volume window appears.
The Main Menu appears and the MUTE icon is highlighted. MUTE OFF appears by the icon.
2
Turn the ROTARY knob (at the lower righthand corner of the monitor) to adjust the volume.
4
2
To turn the mute off, press the On Screen Display button and repeat steps 2 - 3.
Press the ON SCREEN DISPLAY button a second time. MUTE ON appears by the icon and EXIT OSD Is highlighted.
3
When finished, press the VOLUME button again. The Volume screen disappears .
3
Press the ON SCREEN DISPLAY (OSD) button a third time to exit the OSD.
Smart Help
To go to DEGAUSS . . . . . . instead of pressing the ON SCREEN DISPLAY (OSD) button a third time, turn the ROTARY knob until DEGAUSS is highlighted. Next, press the OSD button. Turn to the next page and follow steps 2 - 3. . . . once you have exited the OSD, press the OSD button and turn the Rotary knob until DEGAUSS is highlighted. Next, press the OSD button. Turn to the next page and follow steps 2 - 3. If you do not press the OSD button a third time, the OSD window will �time out� (disappear) after five seconds. You can change this time. See page 8 for time out options.
Smart Help
After Volume Window has disappeared, to continue to the Main Menu, press the larger OSD (On Screen Display) button between the BRIGHTNESS and CONTRAST buttons. Next, follow steps 2 - 3 under MUTE. If you do not press the VOLUME button a second time, the Volume window will �time out� (disappear) after five seconds. You can change this time. See page 8 for time out options.
5
|
|
|
> |
|
