I used your service and I found myself well I need service manual teac v plate 770 and I was able to access and remove the belt that erno routes. thanks I recommend it to all
At first I thought there had been a mix up as I required the service manual for the cassette unit and the one supplied was for the CD unit. However when I scrolled further down I realised that both had been scanned together! This enabled me to dismantle and repair the cassette unit as intended and I also have a copy of the manual for both the CD and graphic equaliser units should I ever need them. Thanks very much for a great service.
Text excerpt from page 58 (click to view)
(S-7) [9] [8]
[14]
(S-8) (S-9) [15]
A Desolder from bottom [8]
(S-6) LDG Belt
Lead with White Stripe
View for A
Fig. DM7
Fig. DM9
(L-2)
Adj. Screw [11] (L-1)
[17] (L-3)
After removing the Screw (S-10), while pressing the Locking Tab (L-3), remove [16]. [16] [18]
(P-3) [13] [12] [10] (P-2) A
(S-10)
Pin of [12] Pin of [10]
Fig. DM10
Grooves of [28] When reassembling [10] and [12], confirm that pin of [10] and pin of [12] are in the grooves of [28] as shown.