Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
The owners manual for the Pioneer VSX-D603S was exactly what I needed. I received it in a timely manor and it was priced fairly. I definately will use your servise again. Thank You
This is a great manual. It was easy to read and very accurate. The size of the manual is small so email is no problem. I highly recommend it. The manual is very hard to find other than this website.
Text excerpt from page 31 (click to view)
27
TROUBLESHOOTING
Remote Does Not Work �Check the batteries. If necessary, replace them with 2 AA Heavy Duty (Zinc Chloride) or Alkaline batteries. �Clean the remote control and the remote control sensor window on the TV. �Check the TV power cord. Unplug the TV, wait 10 seconds, then reinsert the plug into the outlet and push the POWER button again. �Be sure the fuse is not blown on the AC power strip, if one is being used. �Check to be sure the TV outlet is not on a wall switch. TV Displays Wrong Channel or No Channels Above 13 �Repeat channel selection. �Add the desired channel numbers (using the CHANNEL EDIT control) into the TV�s memory. �Check to be sure the TUNER MODES are set to the CABLE option and run the Auto Program feature to find all available channels.
No Power �Check the TV power cord. Unplug the TV, wait 10 seconds, then reinsert the plug into the outlet and push the POWER button again. �Check that the outlet is not on a wall switch. �Be sure the fuse is not blown on the AC power strip, if one is being used. No Picture �Check antenna connections. Are they properly secured to the TV's ANT 75� plug? �Check the TUNER MODE control for the correct tuner setting. �Try running the Auto Program feature to find all available channels. �Press the CH+ or CH- buttons on the remote to make sure the correct signal source is selected (FRONT or Current Channel). No Sound �Check the VOLUME buttons. �Check the MUTE button on the remote control. �If you�re attempting to hook up auxiliary equipment, check the audio jack connections located on the front of the TV.