This is one of four manuals I have downloaded recently.
Purchase was very straight forward and the authorising email arrived in about 4 hours.
The quality of the scan is good. Print is clear and square to the page edges.
The manual was exactly what I wanted and I found it nowhere else. Thanks!
Text excerpt from page 72 (click to view)
USB Hub (Optional Feature)
PCUH411 USB Hub (Option)
Front View � Rear View � Installing your USB Hub
Installing your USB Hub
Installing on a conventional base. 1. Take out the USB hub from the box. 2. Take off the USB hub cover. 3. Slightly tilt and lift the base of your monitor. 4. Attach the USB hub by clipping into the base. 5. You can reposition the USB hub along the base to suit your needs. Installing on the Multimedia base. Follow Steps 1 and 2 above. 6. Position the USB
file:///D|/rita/LF2/LF2/LFa1/multi_manual/english/INSTALL_2/usbhub/usb_inst.htm (1 of 2) [8/29/2001 2:59:36 PM]